DSP 44 K RACK 4-Channel Dante™ DSP Power Amplifier and Patchbay in 19"Rack Case

This ready-to-use 3 U amp rack comes with LD Systems' DSP 44K power amplifier pre-wired to a patchbay providing convenient front panel input and output access. The rugged case with front and rear lids is made of 7 mm plywood with black film face and high-quality hardware.

Delivering 4 x 1,200 watts into 4 and 2 ohms, the amp features 24-bit signal processing and includes a preset library making it the perfect engine to power passive LD Systems loudspeakers such as Stinger® series models.

Send e-mail
SPECIFICATIONS
DOWNLOADS & LINKS
AVAILABLE AT
  • SPECIFICATIONS

    Product number: LDDSP44KRACK
    Product type: Power Amplifier Accessories, Power Amplifiers
    Type: 19" / 1 U, 19" / 3 HE, 4-channel
    Connectors: 2 x RJ45, 4 x Neutrik XLR Chassis Socket, 4 x Neutrik Speakon, 2 x Neutrik XLR Chassis Connector
    Rated ouput power (1kHz @ 2 Ohms): 4 x 1200W
    Length: 483mm
    Rated ouput power (1kHz @ 4 Ohms): 4 x 1200W
    Height: 44.5mm, 89mm
    Rated ouput power (1kHz @ 8 Ohms): 4 x 675W
    Rated ouput power (1kHz @ 4 Ohms, bridged): 2 x 2400W
    Depth: 110mm, 320mm
    Material: Steel
    High Z 70Vrms / 100Vpeak: 4 x 1200W
    High Z 100Vrms / 140Vpeak: 2 x 2400W
    Material thickness: 1.5mm
    Output circuitry: Class H
    Frequency response: 10 - 22000Hz
    Surface: Powder coated
    Weight: 1,5kg, 7,9kg, 17,9kg
    THD: < 0.05 % @ 1 kHz
    Signal-to-noise ratio: 104dB
    Protection circuits: short circuit, thermal protection, RMS speaker limiter, Multiband limiter, clip limiter, over-current, DC protection, soft start
    Controls: Direct access buttons, On / off switch, Exit / lock button, Rotary switch
    Indicators: LC display
    Line inputs: 4
    Line input connectors: Neutrik XLR
    Line outputs: 4
    Line output connectors: Neutrik XLR
    Loudspeaker outputs: 4
    Speaker output connections: Speakon
    Cooling: 2 fans, temperature controlled
    Maximum Ambient Temperature: 0 - 40°°C
    Operating voltage: 220 V AC - 240 V AC, 50-60 Hz, Switching power supply
    Relative Humidity:: < 80% (non-condensing)
    Power consumption @ full load: 1900 W
    Width: 482mm
    Features: Ethernet, Dante interface, USB front port, 19" / 2 U, Active Power Factor Correction, Computer control software, DSP controlled, LD Systems loudspeaker preset library
  • DOWNLOADS & LINKS

    Type Name sort Category sort File size
    LD Systems Catalogue Catalogue 23982 kb
    Image 1 Product image
    Image 2 Product image
    Image 3 Product image
    Image 4 Product image
    Image 5 Product image
    Image 6 Product image
    Image 7 Product image
    Image 8 Product image
    Type Name Category
    LD Systems Catalogue Catalogue
    Image 1 Product image
    Image 2 Product image
    Image 3 Product image
    Image 4 Product image
    Image 5 Product image
    Image 6 Product image
    Image 7 Product image
    Image 8 Product image
  • AVAILABLE AT

    No Dealers found? Google it!
  • DOWNLOADS & LINKS

    Type Name sort Category sort File size
    LD Systems Catalogue Catalogue 23982 kb
    Image 1 Product image
    Image 2 Product image
    Image 3 Product image
    Image 4 Product image
    Image 5 Product image
    Image 6 Product image
    Image 7 Product image
    Image 8 Product image
    Type Name Category
    LD Systems Catalogue Catalogue
    Image 1 Product image
    Image 2 Product image
    Image 3 Product image
    Image 4 Product image
    Image 5 Product image
    Image 6 Product image
    Image 7 Product image
    Image 8 Product image
  • SPECIFICATIONS

    Product number: LDDSP44KRACK
    Product type: Power Amplifier Accessories, Power Amplifiers
    Type: 19" / 1 U, 19" / 3 HE, 4-channel
    Connectors: 2 x RJ45, 4 x Neutrik XLR Chassis Socket, 4 x Neutrik Speakon, 2 x Neutrik XLR Chassis Connector
    Rated ouput power (1kHz @ 2 Ohms): 4 x 1200W
    Length: 483mm
    Rated ouput power (1kHz @ 4 Ohms): 4 x 1200W
    Height: 44.5mm, 89mm
    Rated ouput power (1kHz @ 8 Ohms): 4 x 675W
    Rated ouput power (1kHz @ 4 Ohms, bridged): 2 x 2400W
    Depth: 110mm, 320mm
    Material: Steel
    High Z 70Vrms / 100Vpeak: 4 x 1200W
    High Z 100Vrms / 140Vpeak: 2 x 2400W
    Material thickness: 1.5mm
    Output circuitry: Class H
    Frequency response: 10 - 22000Hz
    Surface: Powder coated
    Weight: 1,5kg, 7,9kg, 17,9kg
    THD: < 0.05 % @ 1 kHz
    Signal-to-noise ratio: 104dB
    Protection circuits: short circuit, thermal protection, RMS speaker limiter, Multiband limiter, clip limiter, over-current, DC protection, soft start
    Controls: Direct access buttons, On / off switch, Exit / lock button, Rotary switch
    Indicators: LC display
    Line inputs: 4
    Line input connectors: Neutrik XLR
    Line outputs: 4
    Line output connectors: Neutrik XLR
    Loudspeaker outputs: 4
    Speaker output connections: Speakon
    Cooling: 2 fans, temperature controlled
    Maximum Ambient Temperature: 0 - 40°°C
    Operating voltage: 220 V AC - 240 V AC, 50-60 Hz, Switching power supply
    Relative Humidity:: < 80% (non-condensing)
    Power consumption @ full load: 1900 W
    Width: 482mm
    Features: Ethernet, Dante interface, USB front port, 19" / 2 U, Active Power Factor Correction, Computer control software, DSP controlled, LD Systems loudspeaker preset library
  • AVAILABLE AT

    No Dealers found? Google it!
Send e-mail

to a friend.

CAPTCHA Image
New code
Send e-mail

to a friend.

CAPTCHA Image
New code
×

E-mail sent successfully

×
×