Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results

DDQ SUB 18

18" active PA Subwoofer with DSP
Item No.: LDDDQSUB18
Series: DDQ
Versions:

The LD Systems DDQ Sub 18 is a powerful active subwoofer with digital signal processing for demanding PA applications. It is precisely adapted for combination with the full-range speakers of the DDQ Series and is equally suitable for use with tops made by other manufacturers.

The compact bass-reflex design is loaded with an 18" FaitalPRO bass speaker that has a 4" voice coil and a neodymium magnet driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply with a total output of 1400 watts RMS. The DDQ Sub 18 attains a maximum sound-level pressure of 134 dB with a frequency response curve of 30 – 120 Hz.

The Sharc DSP programmed especially for the DDQ subwoofers ensures distortion-free and reliable operation even at maximum volume levels with a 1ms look ahead limiter, frequency and phase correction, as well as all protection circuits, and has a large dynamic range of 127dB/113 dB (ADC/DAC). Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. In addition to XLR inputs and outputs, the DDQ Sub 18 has a separate mono output with a 100Hz high-pass filter. Additional features are LED function indicators and a ground lift switch; the volume and preset controls can be deactivated to prevent inadvertent adjustment.

The cabinet of the DDQ Sub 18 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is equipped with two M20 threaded flanges and ergonomic handles and is prepared for mounting of casters.

 

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results

The LD Systems DDQ Sub 18 is a powerful active subwoofer with digital signal processing for demanding PA applications. It is precisely adapted for combination with the full-range speakers of the DDQ Series and is equally suitable for use with tops made by other manufacturers.

The compact bass-reflex design is loaded with an 18" FaitalPRO bass speaker that has a 4" voice coil and a neodymium magnet driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply with a total output of 1400 watts RMS. The DDQ Sub 18 attains a maximum sound-level pressure of 134 dB with a frequency response curve of 30 – 120 Hz.

The Sharc DSP programmed especially for the DDQ subwoofers ensures distortion-free and reliable operation even at maximum volume levels with a 1ms look ahead limiter, frequency and phase correction, as well as all protection circuits, and has a large dynamic range of 127dB/113 dB (ADC/DAC). Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. In addition to XLR inputs and outputs, the DDQ Sub 18 has a separate mono output with a 100Hz high-pass filter. Additional features are LED function indicators and a ground lift switch; the volume and preset controls can be deactivated to prevent inadvertent adjustment.

The cabinet of the DDQ Sub 18 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is equipped with two M20 threaded flanges and ergonomic handles and is prepared for mounting of casters.

Specifications
General
Product type PA subwoofer
Type Powered
Design DSP controlled
Low/mid driver dimensions 18 "
Woofer size 457.2 mm
Woofer magnet Neodymium
Woofer brand Faital Pro
Woofer voice coil 4 "
Woofer voice coil (mm) 101.6 mm
Amplifier Class D
System Power (RMS) 1400 (2 x 700) W
Frequency response 30 - 120 Hz
Max. SPL (continuous) 126 dB
Max. SPL (peak) 134 dB
Protection circuits DSP-based "look ahead" limiter, over-current, RMS power supply limiter, RMS speaker limiter, short circuit
Controls DSP presets, DSP/ Gain enable, Gain, ground lift, Power
Indicators DSP/ Gain disable, Operate, Peak Limiter, Signal
Line inputs 2
Line input connectors XLR
Line outputs 3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
Line output connectors XLR
Operating voltage Switching power supply
Operating voltage 180 - 264 V ~ / 47 - 63 Hz
Cabinet material 18 mm Plywood
Cabinet surface Polyurea
Cabinet construction Bass Reflex
Width 510 mm
Height 700 mm
Depth 725 mm
Weight 44,5 kg
Features 15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz), 2 x threaded flange (M20), 3 x corner handles, prepared for mounting of casters
Downloads & links
Name
Category
Type
File size
LD Systems Catalogue Catalog pdf 38 MB
Data sheet Data Sheet pdf 341 KB
LD Systems EASE Data EASE Data zip 82 MB
Product images Image files zip -
User's Manual Manual pdf 7 MB
LD Systems DDQ Series GLL Software zip 13 MB
Tender documents Tender Specifications zip 162 KB
LD Systems Catalogue

Category: Catalog

Type: pdf

File size: 38 MB

Data sheet

Category: Data Sheet

Type: pdf

File size: 341 KB

LD Systems EASE Data

Category: EASE Data

Type: zip

File size: 82 MB

Product images

Category: Image files

Type: zip

File size: -

User's Manual

Category: Manual

Type: pdf

File size: 7 MB

LD Systems DDQ Series GLL

Category: Software

Type: zip

File size: 13 MB

Tender documents

Category: Tender Specifications

Type: zip

File size: 162 KB

(0) Download files
Stories
9. Mar 2021
Press: Now Available – Free EASE Files for LD Systems Installation Loudspeakers
Related Products
Buy
No suitable online shop found? Then search on Google Shopping Or find a local dealer: