Permanent installations require solutions which offer a visually discrete design that blends into the background while still being flexible and versatile in their functions. You need to be able to connect different audio sources and manage them, to mute non-priority signals during announcements or emergency calls.
With IMA® 30, LD Systems presents the first model of the new IMA® mixing amplifier-series, which leaves nothing to be desired in terms of design and flexibility.
Seamless integration with IMA® 30 is a sure thing in both industrial and commercial applications thanks to the compact 9.5-inch housing design, an array of connection possibilities, including Bluetooth for wireless connection of Audio and a multistage priority circuit. IMA® 30 is equipped with four priority levels to manage all connected audio signals during emergency or priority announcements. An automatic standby mode can also be activated to reduce power consumption during absence of audio signal.
The mixing amplifier features two priority contact closures: one for emergency input to mute both Mic/Line and music sources, and one for Mic/Line Channels to mute music sources only.
The outputs provide 35 W of power at 4 Ohm, a two-band equalizer for bass and trebles as well as 70 V/100 V tap settings. The Hi-Z and Lo-Z selector switch lets you separate the output signal completely from the output transformer to ensure an optimal frequency response for low impedance applications. The built-in aux output can be used to add external power amplifiers, active subwoofers or on-hold music systems to the IMA® 30. You can also choose to send the entire mix or only the selected music signal source to the aux output using the music-mix selector switch.
|Product type||Installation mixer preamplifier|
|Emergency input||1 balanced line input|
|Mic/ line inputs||2|
|Music sources||2 unbalanced stereo line inputs, Bluetooth 4.0|
|Powered outputs||1 with output mode selector (Low-Z/High-Z)|
|Nominal input sensitivity||-6 dBu (Sine 1 kHz, Gain max)|
|Nominal input clipping||20 dBu (Sine 1kHz)|
|Connector||5-pin Terminal Block, pitch 5.08mm|
|Nominal input sensitivity Mic||- 36 dBu (Sine 1 kHz, Gain max)|
|Nominal input clipping Mic||- 17 dBu (Sine 1kHz)|
|Nominal input clipping line||Line +19dBu (Sine 1kHz)|
|Phantom power||+ 24V, 10mA switchable|
|Connector Mic/Line1||5-pin Terminal Block, pitch 5.08mm, XLR/6.3 mm jack|
|Connector Mic/Line 2||1 dual RCA Mono Summed, 3-pin Terminal Block, pitch 5.08 mm|
|Nominal input sensitivity CD/AUX||- 6.22 dBV (Sine 1 kHz, Gain max)|
|Nominal input clipping CD/AUX||7.78 dBV (Sine 1kHz)|
|Connector CD/AUX||2 x dual RCA Mono Summed|
|Amplifier Outputs||High-Z: 70V or 100V outputs, Low-Z: 4 ohm minimum load|
|Preamplifier input||5-pin Terminal Block, pitch 5.08mm|
|RMS Power ( W )||35 W (Continuous sine wave 1kHz, 4 ohm load)|
|Power ( Peak ) (W)||39 W (100 msec sine 1kHz burst @ 4 ohm load)|
|Frequency range||20 Hz - 20 kHz (LO-Z, -3 dB), 60 Hz - 20 kHz (HI-Z, -3 dB)|
|Tone controlBass||+/-10dB (100Hz)|
|Tone control Treble||+/-10dB (100Hz)|
|Protection circuits||Audio Limiter, over-current, short circuit, thermal overload|
|Connector AUX-output||3-pin Terminal Block, pitch 5.08 mm|
|Maximum gain||22 dB|
|Operating voltage||100 V AC - 240 V AC, 50 - 60 Hz|
|Power consumption (max.)||70 W|
|Idle power consumption||7 W (no signal input)|
|Operating temperature ( non-condensing )||0°C - 40°C; < 85% humidity, Non condensing|
|Time to Auto-standby||20|
|Dimensions (W x H x D) ( height with rubber feet )||210 x 96.5 x 266.76 mm|
|Optional accessories||Rack mounting hardware|