The MAILA COL full-range column module makes MAILA truly versatile. With its 4x 6.5'' woofers, the elegant column element not only provides an extended low-mid range, but also includes a 4-channel DSP amplifier with 2.5 kW total power, which drives both the column itself and the MAILA SAT satellites.
In this way, MAILA sets with column module can not only be used as a ground stack variant, but also as a flown array consisting of MAILA COL and up to eight MAILA SAT - especially useful for festivals and fixed installations. In addition, as with a classic line array, users can select different subwoofer arrangements and adapt them to the sound reinforcement requirements on site.
On the ground, the use of MAILA COL provides a further advantage: the interconnected column module allows ground stack sound setups that are significantly higher (up to 3.4 metres) than conventional systems and, with its greater throw, also enables uniform sound coverage in the far field.
With LogoLink®, LD Systems has added another innovation to MAILA. Via the free MAILA app (iPadOS), every MAILA system can be quickly, easily and precisely adjusted and wirelessly supplied with software updates. Once connected, the app automatically recognises the existing MAILA components and enables the system to be set up quickly and easily - including calculation of the SAT angles - in the run-up to an event. The highlight: the wireless antennas are invisibly integrated into the LD logo of the MAILA COL.
|Product type||MAILA Column|
|Low/mid driver dimensions||4 x 6.5 "|
|Woofer size||16.51 mm|
|Woofer voice coil||2 "|
|Woofer voice coil (mm)||50 mm|
|System Power (RMS)||2500 W|
|Frequency response (-6dB)||105 Hz - 500 Hz|
|Protection circuits||limiter, over-current, thermal overload|
|Input impedance||20000 Ohm(s)|
|Indicators||Indication LED, LC display, Limit, Power, Protect, Signal|
|Line input connectors||XLR|
|Line output connectors||XLR|
|Speaker output connections||SmartLink+®|
|Wireless Connectivity||LogoLink® for App Control|
|Power consumption (max.)||800 W|
|Operating voltage||100 V AC - 240 V AC, 50 - 60 Hz|
|Operating Temperature||0 - 40 °C|
|Relative Humidity||< 80 %, not condensing|
|Cabinet material||Die-cast aluminium|
|Cabinet construction||Bass Reflex|
|Mounting||3 x M10, 4 x Pin, EasyMount+®|
|Bit depth AD/DA converter||24 bit|
|Sampling frequency||48 kHz|