DPA260

Product type: Signal Processors Accessories
Type: Remote control via multicore
Connector 1-A: USB A Port
Connector 1-B: XLR 3-pin female

19" DSP Controller 6-channel

Item No.: LDDPA260

The LD DPA 260 is a 6-channel 19” speaker processor for our VA4 and VA8.

Contents and categories

Contents and categories

Series

Specifications

Product type	Signal Processors
Type	6-channel
Version	6-channel
AD/DA converter	24 bit
Sampling frequency	48 kHz
Frequency response	20 - 20.000 Hz
Filter type	Bessel , Butterworth , Linkwitz-Riley
Delay	max. 848.99 mS
Filter slew rate	12 dB/oct , 18 dB/oct , 24 dB/oct , 6 dB/oct
Dynamic range	111 (A-weighted) dB
Signal-to-noise ratio	> 106 dB
Total Harmonic Distortion (THD)	< 0.005 %
Crosstalk	107 (+ 20 dBu @ 1 kHz) dB
Max. input level	+20 dBu (balanced) dBu
Max. output level	+20 dBu (balanced) dBu
Input impedance (kOhms)	27 kOhm
Output impedance	120 Ohm(s)
Controls	Edit Input 1 - 2 , Edit Output 1 - 6 , Enter , Escape , NAV / PAR 1 , PAR 2 , PAR 3 , Utility
Indicators	2 x 6-segment input level display , 2 x input clip , 2 x input edit LED , 2 x input mute LED , 6 x 5-segment output level display , 6 x output clip , 6 x output edit LED , 6 x output limit , 6 x output mute LED , multifunction LC display
Line inputs	3
Line input connectors	1 x stereo digital (SPDIF coax) , 2 x XLR (bal.)
Line outputs	6
Line output connectors	XLR (balanced)
Interfaces	RS485 (in & out) , USB
Mains connector	IEC socket
Operating voltage	90 V AC - 250 V AC, 50 - 60 Hz
Width	482 mm
Height	44.5 mm
Depth	225 mm
Weight	3,5 kg