STINGER G3 IMPACT SET A 2 x 15" powered PA Speaker + 4 x 18" powered Subwoofer
Delivering a massive low-end with punch and clarity, this set is ideal for outdoor sound reinforcement. With a quartet of subwoofers and two 15” tops, it easily covers medium-sized gigs at town fairs, street festivals and in marquees. We recommend this set for the following type of application: DJ, outdoor sound reinforcement for bands. The STINGER G3 IMPACT SET A is suitable for audiences of up to 400* pax. For optional stands and cables check out the "related products" section.
Set consisting of:2 x STINGER 15 A G3 – 15” Powered loudspeaker
4 x STINGER SUB 18 A G3 – 18” Powered subwoofer
2 x STINGER 15 G3 PC – Padded protective cover for loudspeaker
4 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
4 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
Product type | PA system |
Type | Powered |
System output (RMS) | 3,400 W |
Frequency response | 35 - 20,000 Hz |
Dispersion (H x V) | 90 x 50° |
Weight | 260 kg |
Product type | PA Complete Systems Accessories |
Type | castor boards |
Material | Birch multiplex |
Material thickness | 15 mm |
Surface | Polyurea |
Color | Black |
Width | 540 mm |
Number of casters | 4 |
Wheel diameter | 100 mm |
Manufacturer of castors | Adam Hall |
Weight | 7 kg |
Number of drag castors | 2 |
Length | 650 mm |
Product type | PA loudspeaker |
Type | active |
Low/mid Woofer dimensions | 15 " |
Woofer dimensions (mm) | 381 mm |
Width | 480 mm |
Height | 737 mm |
Woofer magnet | Ferrite |
Woofer brand | Custom-made |
Woofer voice coil | 3 " |
Weight | 26,8 kg |
Woofer voice coil (mm) | 76.2 mm |
Amplifier | Class D |
Horn | BEM optimized CD Horn |
HF driver dimensions | 1 " |
System Power (RMS) | 500 W |
HF driver dimention (mm) | 25.4 mm |
Peak power | 1000 W |
HF driver magnet | Ferrite |
Frequency response | 50 - 20000 |
HF driver brand | BMS |
HF driver voice coil | 1 " |
Max. SPL (Peak) | 133 dB |
HF driver voice coil | 25.4 mm |
Protection circuits | thermal overload |
Dispersion (H x V) | 90 x 50 ° |
Controls | Mode |
Indicators | Signal |
Line inputs | 2 |
Line outputs | 1 |
Line output connectors | XLR |
Operating voltage | Switching power supply |
Operating Temperature | 0 - 40 °C |
Relative Humidity | < 80% (non-condensing) |
Cabinet material | 15 mm Plywood |
Input sensitivity | -5 dBu |
Cabinet surface | Polyurea |
Cabinet construction | Bass Reflex |
Line input connectors | XLR |
Monitor angle | 54 ° |
Depth | 455 mm |
Product type | PA Loudspeakers Accessories |
Type | Covers |
Color | Black |
Material | Nylon 1680D |
Thickness of the padding | 8 mm |
Height | 700 mm |
Width | 510 mm |
Depth | 460 mm |
Weight | 0,998 kg |
Product type | PA subwoofer |
Type | active |
Low/mid Woofer dimensions | 18 " |
Woofer dimensions (mm) | 457.2 mm |
Width | 677 mm |
Woofer magnet | Ferrite |
Height | 547 mm |
Depth | 740 mm |
Woofer brand | Custom-made |
Woofer voice coil | 4 " |
Weight | 42,6 kg |
Woofer voice coil (mm) | 101.6 mm |
Amplifier | Class D |
System Power (RMS) | 800 W |
Peak power | 1600 W |
Frequency response | 35 - Low-Pass |
Max. SPL (Peak) | 135 dB |
Protection circuits | short circuit |
Input impedance | 30000 Ohm(s) |
Input sensitivity | 0.3 V |
Controls | Mode |
Indicators | Signal |
Line inputs | 2 |
Line input connectors | XLR |
Line outputs | 2 |
Line output connectors | XLR |
Operating voltage | SMPS |
Power consumption (max.) | 600 W |
Operating Temperature | 0 - 40 °C |
Relative Humidity | < 80% (non-condensing) |
Cabinet material | 18 mm Plywood |
Cabinet surface | Polyurea |
Cabinet construction | Bass Reflex |
Product type | PA Subwoofer Accessories |
Type | Covers |
Color | Black |
Material | Nylon 1680D |
Thickness of the padding | 8 mm |
Width | 567 mm |
Height | 470 mm |
Depth | 625 mm |
Weight | 1,5 kg |