DIO 04 4 output Dante interface
Part of the TICA® series, the DIO 04 is a four output Dante interface that delivers the capabilities that audio and AV professionals really need. Equipped with four balanced outputs to connect to any analogue audio device such as power amplifiers. Signal presence lights on each channel speed installation and fault-finding.
Power from any PoE+ network switch or use the optional, external power supply. Since it comes with two Dante networked ports, you can daisy chain devices together. It also works as a PoE+ injector: if you use the external power supply, you can power one further networked device in the chain.
Its tiny form factor (142 x 53 x 221mm) and included mounting plates allow it to be installed discreetly behind screens or under tables. Alternatively, it fits into 1/3 19 inch rack. Use the optional rack tray to slot up to three TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.
Terminal block connections on the analogue outputs make wiring easy.
The perfect solution for professional installers wanting to interface into Dante equipment.
Dante Domain Manager and AES 67 compliant.
| Product type | 0x4 I/O Dante Interface |
| Inputs | 0 |
| Input type | Switchable Balanced mic or line level |
| Line outputs | 4 |
| Output type | Balanced line level with auto mute relay on loss of Dante/AES67 signal |
| Cooling | Convection |
| Number of output connectors | 4 |
| Connector | 3-pin terminal block (3.81 mm) |
| Max. output level | 18 dBu |
| Intermodulation Distortion (SMPTE) | < 0,005 % (-20dBFS to 0dBFS) |
| THD + N | < 0.002% (10 dBu, 20 kHz BW) |
| Idle Noise | > - 92 dBu |
| Dynamic Range | > 107 dB (0dBFS, AES 17, CCIR-2k Weighting) |
| Frequency range | 15 Hz - 20 kHz (-0,5 dB) |
| Audio Channels | 4 outputs |
| Bit depth AD/DA converter | 24 bit |
| Sampling frequency | 48 kHz |
| System Latency: | Minimum 1ms |
| Connector DANTE | 100 BASE-T RJ45 |
| Minimum PoE Requirements | PoE+ IEEE 802.3at |
| PSE+ Data | Capable of powering 1 extra PD unit |
| Input voltage | 24 V DC |
| Minimum Current | 1.5 A |
| Power connector | Pitch 5,08 mm terminal block (2-pin) |
| Max. Power consumption | 10 W |
| Idle power consumption | 7.5 W (no signal input) |
| Power Consumption with Secondary Port | 22 W |
| Mains Inrush Current | 1.7A @ 230V AC |
| Operating temperature ( non-condensing ) | 0°C - 40°C; < 85% humidity |
| Material | Plastic Front panel, Steel chassis |
| Dimensions (W x H x D) ( height with rubber feet ) | 142 mm x 53 mm x 221.7 mm |
| Weight | 0,001 kg |
| Accessories (included) | Mounting plates for surface mount applications, rubber feet, Terminal blocks for electrical connections. |
For a quote on this item, please contact our sales department or make an appointment with our sales representatives.
Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888