Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results
  • NEW
  • NEW

DIO 22 2x2 input/output Dante interface

Item No.: LDDIO22
Series: TICA
Versions:
Two input and output Dante interface
Connect microphones or line level inputs
Four-step gain control and 24V phantom power per channel
Terminal blocks for all analogue connections
Signal indicators on each channel
Use PoE or an external power supply
Use as a PoE injector to power another networked device
Daisy-chain Dante devices together
Easy front panel configuration and user lock
 

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results
Two input and output Dante interface
Connect microphones or line level inputs
Four-step gain control and 24V phantom power per channel
Terminal blocks for all analogue connections
Signal indicators on each channel
Use PoE or an external power supply
Use as a PoE injector to power another networked device
Daisy-chain Dante devices together
Easy front panel configuration and user lock
Description

Part of the TICA® series, the DIO 22 is a two input and output Dante interface that delivers the capabilities that audio and AV professionals really need. Equipped with two balanced mic/line inputs and line outputs with four-step gain settings and 24V phantom power on each input. Signal presence lights on each channel speed installation and fault-finding.

The DIO 22 is easy to configure from the front panel and can then be locked to prevent tampering.

Power from any PoE+ network switch or use the optional, external power supply. Since it comes with two Dante networked ports, you can daisy chain devices together. It also works as a PoE+ injector: if you use the external power supply, you can power one further networked device in the chain.

Its tiny form factor (142 x 43 x 221mm) and included mounting plates allow it to be installed discreetly behind screens or under tables. Alternatively, it fits into 1/3 19 inch rack. Use the optional rack tray to slot up to three TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.

Terminal block connections on the analogue inputs and outputs make wiring easy.

The perfect solution for professional installers wanting to interface into Dante equipment.

Dante Domain Manager and AES 67 compliant.

Specifications
General
Product type
2x2 I/O Dante Interface
Inputs
2
Input type
Switchable Balanced mic or line level
Line outputs
2
Output type
Balanced line level with auto mute relay on loss of Dante/AES67 signal
Cooling
Convection
Analogue Input Section
Number of input connectors
2
Connector
3-pin terminal block (3.81 mm)
Mic input sensitivity
55mV (Gain +30dB switch)
Nominal input clipping
20 dBu (Sine 1kHz), Gain 0dB switch
Frequency response
10 hz - 20 kHz ( 0,5 dB)
THD + Noise
< 0.003% (0dB switch, 4 dBu, 20 kHz BW)
DIM
< -90dB (+ 4 dBu)
Input Impedance
10 kohms (balanced)
Crosstalk
< 105dB (20 kHz BW)
SNR
> 112 dB (0dB switch, 20 dBu, 20 kHz BW, a-weighted)
CMRR
> 50 dB
High Pass Filter
100Hz (-3dB, when +15 or +30dB is selected)
Phantom Power (per input)
+ 24 VDC @ 10 mA max
Gain
-15dB, 0dB, +15dB, +30dB
Analogue line outputs
Number of output connectors
2
Line Output Connectors
3-pin terminal block (3.81 mm)
Max. output level
18 dBu
Intermodulation Distortion (SMPTE)
< 0,005 % (-20dBFS to 0dBFS)
THD + N
< 0.002% (10 dBu, 20 kHz BW)
Idle Noise
> - 92 dBu
Dynamic Range
> 107 dB (0dBFS, AES 17, CCIR-2k Weighting)
Frequency range
15 Hz - 20 kHz (-0,5 dB)
Dante™ Specifications
Audio Channels
2 Inputs / 2 Outputs
Bit depth AD/DA converter
24 bit
Sampling frequency
48 kHz
System Latency:
Minimum 1ms
Connector DANTE
100 BASE-T RJ45
PoE ( Power over Ethernet )
Minimum PoE Requirements
PoE+ IEEE 802.3at
PSE+ Data
Capable of powering 1 extra PD unit
Power Supply
Input voltage
24 V DC
Minimum Current
1.5 A
Power connector
Pitch 5,08 mm terminal block (2-pin)
Max. Power consumption
10 W
Idle power consumption
7.5 W (no signal input)
Power Consumption with Secondary Port
22 W
Mains Inrush Current
1.7A @ 230V AC
Operating temperature ( non-condensing )
0°C - 40°C; < 85% humidity
Material
Plastic Front panel, Steel chassis
Dimensions (W x H x D) ( height with rubber feet )
142 mm x 53 mm x 221.7 mm
Weight
1,04 kg
Accessories (included)
Mounting plates for surface mount applications, rubber feet, Terminal blocks for electrical connections.
Downloads & links
Name
Category
Type
File size
User manual Manual pdf 7 MB
Tender documents Tender Specifications zip 162 KB
LD Systems Catalogue Catalog pdf 38 MB
Product images Image files zip -
User manual

Category: Manual

Type: pdf

File size: 7 MB

Tender documents

Category: Tender Specifications

Type: zip

File size: 162 KB

LD Systems Catalogue

Category: Catalog

Type: pdf

File size: 38 MB

Product images

Category: Image files

Type: zip

File size: -

(0) Download files
Stories
11. Jan 2024
Adam Hall Integrated Systems prepares for a busy ISE 2024
2. Nov 2023
LD Systems launches new TICA® Series for the installation market
Buy

For a quote on this item, please contact our sales department or make an appointment with our sales representatives.

Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888