Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results

AMP 106 T 1-Channel Mini Installation Power Amplifier 60 W @ 4 Ohm / 70V/100V

Item No.: LDAMP106T
Series: TICA
Professional mini amplifier
60W Class-D amplifier with Lo-Z / Hi-Z selector switch between 4 Ohm / 100V / 70V outputs
Small format 1/4 19" rack, 1U
Silent operation with passive cooling
Third-party connectivity for remote standby and volume control
External 100 - 200V power supply
Mounting plates for flexible inconspicuous installation, even above suspended ceilings
Auto standby to save power
Balanced line input and loudspeaker output with terminal strips
User-friendly front panel with signal, clip and protection LEDs
Optional rack tray for combining with other TICA® series products
 

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results
Professional mini amplifier
60W Class-D amplifier with Lo-Z / Hi-Z selector switch between 4 Ohm / 100V / 70V outputs
Small format 1/4 19" rack, 1U
Silent operation with passive cooling
Third-party connectivity for remote standby and volume control
External 100 - 200V power supply
Mounting plates for flexible inconspicuous installation, even above suspended ceilings
Auto standby to save power
Balanced line input and loudspeaker output with terminal strips
User-friendly front panel with signal, clip and protection LEDs
Optional rack tray for combining with other TICA® series products
Description

Part of the TICA® series, AMP106T it combines of compact size, passive cooling, and high efficiency – ideal for a wide range of audio installation applications.

The 60W Class-D amplifier, can drive low impedance or 70/100V line loudspeaker systems.

Its tiny form factor (120 x 44 x 222mm) and included mounting plates allow it to be installed discreetly behind screens or under tables. Alternatively, it fits into ¼ 19 inch rack. Use the optional rack tray to slot up to four TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.

Terminal strip connections on the balanced line input and speaker output make wiring easy.

With remote control connectivity for third-party devices, you can adjust volume or put the power amplifier into standby mode at any time, even when it's hidden. Optional auto-standby saves power when no audio is running.

The perfect solution for professional installers and users looking for a compact, highly efficient and easy-to-integrate solution.

Specifications
General
Product type
Installation power amplifier
Line inputs
2
Music sources
2 balanced stereo line inputs
Line outputs
0
Powered outputs
1 with output mode selector (Low-Z/High-Z)
Cooling
Convection
Priority levels
1
Input area
Nominal input sensitivity
8.5 dBu (Sine 1 kHz, Gain max)
Nominal input clipping
18 dBu (Sine 1kHz, Gain 0dB)
Input connector
2 x 3.81mm Terminal Block 3-pin
Standby wake up threshold
- 30 dBu
Amplifier Output
Type
Class D
Amplifier Outputs
High-Z: 70V or 100V outputs, Low-Z: 4 ohm minimum load
Connector
4 - pin terminal block (pitch 5.08mm)
RMS Power ( W )
60 W (Continuous sine wave 1kHz, 4 ohm load)
Power ( Peak ) (W)
72 W (100 msec sine 1kHz Burst @ 4 ohm load)
Frequency range
15 Hz - 20 kHz (LO-Z, -1 dB), 20 Hz - 20 kHz (HI-Z, -1 dB)
High Pass Filter
110 Hz
Protection circuits
DC, DC protection, over-current, Short circuit, thermal overload, Undervoltage
Power Supply
Type1
External SMPS
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Secondary connector
Terminal Block 5.08mm 2-pole
Primary Connector
IEC
Idle power consumption
2 W (no signal input)
Standby power consuption
< 1 W
Operating temperature ( non-condensing )
0°C - 40°C; < 85% humidity, non condensing
General data
Time to Auto-standby
20 Min.
Dimensions (W x H x D) ( height with rubber feet )
142 mm x 53 mm x 221.7 mm
Accessories
Rack mounting hardware
Weight
1,3 kg
Downloads & links
Name
Category
Type
File size
User manual Manual pdf 3 MB
Tender documents Tender Specifications zip 162 KB
LD Systems Catalogue Catalog pdf 38 MB
Product images Image files zip -
User manual

Category: Manual

Type: pdf

File size: 3 MB

Tender documents

Category: Tender Specifications

Type: zip

File size: 162 KB

LD Systems Catalogue

Category: Catalog

Type: pdf

File size: 38 MB

Product images

Category: Image files

Type: zip

File size: -

(0) Download files
Stories
11. Jan 2024
Adam Hall Integrated Systems prepares for a busy ISE 2024
2. Nov 2023
LD Systems launches new TICA® Series for the installation market
Buy

For a quote on this item, please contact our sales department or make an appointment with our sales representatives.

Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888