DSP 45 K RACK 4-Channel DSP Power Amplifier and Patchbay in 19" Rack Case
Item No.:
LDDSP45KRACK
Series:
DSP
Pre-loaded 3 U 19” rack case with power amp and patchbay
DSP 45K 4-channel power amplifier with 24-bit DSP
4 x 1,200 watts @ 4 and 2 ohms, 2 x 2,400 watts bridged @ 4 ohms
Integrated preset library for LD Systems loudspeakers
Patchbay with 4 x speakON, 4 x XLR/f, 2 x XLR/m, 1 x RJ45 Neutrik connectors
7 mm plywood case construction with high-quality hardware and front and rear lids
Pre-loaded 3 U 19” rack case with power amp and patchbay
DSP 45K 4-channel power amplifier with 24-bit DSP
4 x 1,200 watts @ 4 and 2 ohms, 2 x 2,400 watts bridged @ 4 ohms
Integrated preset library for LD Systems loudspeakers
Patchbay with 4 x speakON, 4 x XLR/f, 2 x XLR/m, 1 x RJ45 Neutrik connectors
7 mm plywood case construction with high-quality hardware and front and rear lids
Description
This ready-to-use 3 U amp rack comes with LD Systems' DSP 45K power amplifier pre-wired to a patchbay providing convenient front panel input and output access. The rugged case with front and rear lids is made of 7 mm plywood with black film face and high-quality hardware.
Delivering 4 x 1,200 watts into 4 and 2 ohms, the amp features 24-bit signal processing and includes a preset library making it the perfect engine to power passive LD Systems loudspeakers such as Stinger® series models.
Specifications
General
Product type
Power Amplifiers
Type
19" / 3 HE
Weight
17,9 kg
LDDSP45K - LD Systems DSP 45 K RACK 4-Channel Power Amplifier with DSP
Product type
Power Amplifiers
Type
4-channel
Rated ouput power (1kHz @ 2 Ohms)
4 x 1200 W
Rated ouput power (1kHz @ 4 Ohms)
4 x 1200 W
Rated ouput power (1kHz @ 8 Ohms)
4 x 675 W
Height
89 mm
Rated ouput power (1 kHz @ 4 Ohms, bridged)
2 x 2400 W
Rated ouput power (1kHz @ 8 Ohms, bridged)
2 x 1200 W
High Z 70Vrms / 100Vpeak
4 x 1200
High Z 100Vrms / 140Vpeak
2 x 2400
Output circuitry
Class H
Frequency response
10 - 22000
Total Harmonic Distortion (THD)
< 0.05 % @ 1 kHz
Weight
7,9 kg
Signal-to-noise ratio
104 dB
Protection circuits
clip limiter ,
Short circuit ,
Multiband limiter ,
RMS speaker limiter ,
DC protection ,
Thermal protection ,
soft start ,
over-current
Controls
Direct access buttons ,
knob ,
On / off switch ,
Exit / lock button
Indicators
LC display
Line inputs
4
Line input connectors
Neutrik XLR
Line outputs
4
Line output connectors
Neutrik XLR
Loudspeaker outputs
4
Speaker output connections
Speakon
Cooling
2 fans, temperature controlled
Maximum Ambient Temperature
0 - 40 °C
Power supply
100 V AC - 240 V AC, 50 - 60 Hz ,
Switching power supply
Relative Humidity
< 80% (non-condensing)
Power consumption @ full load
1900 W
Width
482 mm
Depth
320 mm
Features
19" / 2 U ,
Active Power Factor Correction ,
DSP controlled
LDDSP45KPB - LD Systems DSP 45 K RACK 19" Patchbay for LDDSP45K
Product type
Power Amplifier Accessories
Connectors
2 x Neutrik XLR Chassis Connector ,
4 x Neutrik Speakon ,
4 x Neutrik XLR Chassis Socket ,
RJ45
Type
19" / 1 U
Length
483 mm
Height
44.5 mm
Depth
110 mm
Material
Steel
Material thickness
1.5 mm
Surface
Powder coated
Weight
1,5 kg
Downloads & links
