ICOA 15 A BT W
This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 15 a BT W A by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this powered 15" loudspeaker exceptionally flexible.
The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 15 A BT W the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 128 dB max. SPL and 1200 W peak performance. Especially the version with white housing and white front grille blends discreetly and unobtrusively into almost any environment.
Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected.
Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 15 A BT W is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.
Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
|Product type||PA loudspeaker|
|Color||White (RAL 9003)|
|Bluetooth Audio Decoder||Bluetooth 4.0|
|Low/mid driver dimensions||15 "|
|Woofer size||381 mm|
|Horn||BEM optimized CD Horn|
|HF driver dimensions||1 "|
|HF driver size||25.4 mm|
|HF driver magnet||Ferrite|
|HF driver brand||Custom-made|
|HF driver voice coil||1.4 "|
|HF driver voice coil||34 mm|
|Dispersion (H x V)||90° x 50°|
|System Power (RMS)||300 W|
|Peak power||1200 W|
|Frequency response||48 - 20000 Hz|
|Crossover frequency kHz||2 kHz|
|Max. SPL (peak)||128 dB|
|Protection circuits||Multiband limiter, over voltage, over-current, thermal overload|
|Controls||2 x gain, On / off switch, Rotary/push encoder|
|Mic/ line inputs||2|
|Mic-/ Line Input Connectors||6.3 mm jack Combination sockets (symmetrical), XLR|
|Line input connectors||3.5 mm TRS|
|Line output connectors||XLR|
|Power consumption||150 W|
|Ambient temperature (in operation)||0 - 40 °C|
|Operating voltage||100 V AC - 240 V AC, 50 - 60 Hz|
|Relative Humidity||< 80 %, not condensing|
|Fuse||T4AL 250 V|
|Cabinet construction||Bass Reflex|
|Mounting||36mm flange (0°, 5°), 6 x M10 flying points|
|Monitor angle||55 °|
|Accessories (included)||Power cord|