ADA 12K4 TOURING RACK 12-Channel Amplifier Rack with Patch Panel and Power Distribution

N. articolo: LDADA12K4TRACK

Serie: ADA

3 × ADA 12K4 Amps – 4 × 2700 W @ 4 Ω per amp

Up to 32.4 kW total system power

24-bit/96 kHz DSP with 32-bit floating point, FIR, IIR and raised-cosine filters, EQ, crossover and delay

12U shockmount touring rack with two slide-in doors

3U patch panel with clear, tour-proof labelling (Neutrik®)

Loudspeaker outputs: 3 × SpeakON NL8, 12 × SpeakON NL4

Inputs: 12 × XLR analogue, 4 × AES3 digital

Link: 12 × analogue via 6 × RJ-45 ports for Audio over Cat (AoC)

Network: 2 × Ethernet RJ-45 ports (Dante™)

2U 32A power distribution with daisy-chain, 6 × Schuko outlets

3 × circuit breakers and 3 × digital voltage/current meters

1U LED-Rack light with motion sensor, multicolour

Acquista

Cerca ora

Contenuti e categorie

Mostra tutti

Contenuti e categorie

Serie

Suggerimenti di ricerca

Mostra tutti i risultati

3 × ADA 12K4 Amps – 4 × 2700 W @ 4 Ω per amp

Up to 32.4 kW total system power

24-bit/96 kHz DSP with 32-bit floating point, FIR, IIR and raised-cosine filters, EQ, crossover and delay

12U shockmount touring rack with two slide-in doors

3U patch panel with clear, tour-proof labelling (Neutrik®)

Loudspeaker outputs: 3 × SpeakON NL8, 12 × SpeakON NL4

Inputs: 12 × XLR analogue, 4 × AES3 digital

Link: 12 × analogue via 6 × RJ-45 ports for Audio over Cat (AoC)

Network: 2 × Ethernet RJ-45 ports (Dante™)

2U 32A power distribution with daisy-chain, 6 × Schuko outlets

3 × circuit breakers and 3 × digital voltage/current meters

1U LED-Rack light with motion sensor, multicolour

Descrizione

The ADA 12K4 Touring Rack is a pre-configured 12-channel system rack for touring and live sound. It houses three ADA 12K4 power amplifiers with DSP & DANTE™. Each amp delivers 4 × 2700 W @ 4 Ω, providing up to 32.4 kW total system power. High-resolution processing (24-bit / 96 kHz with 32-bit floating point and FIR/IIR/raised-cosine filters) supports modern system optimisation, including EQ, crossover and delay. Everything is built into a 12U shockmount rack with two slide-in doors for protected transport and fast access on site.

The 3U ADA TPP patch panel with clear, tour-proof labelling and premium Neutrik® connectors gives direct access to the three amplifiers at the front:

Loudspeaker outputs: 3 × SpeakON NL8, 12 × SpeakON NL4
Inputs: 12 × XLR analogue, 4 × AES3 digital
Link: 6 × AES72 RJ-45 for AoC routing
Network: 2 × Ethernet RJ-45 (Dante™)

The 12 × XLR analogue signals can be linked via the AES72 RJ-45 ports using additional Audio over Cat (AoC) adapters. Two Dante™ ports with support fast network and Armonía Pro Audio Suite™ integration.

Armonía Plus allows LD Systems speaker presets to be managed and updated on the amplifiers without the need for complex configurations. Alternatively, custom presets can be created and managed to optimise the system for specific requirements.

The built-in 2U 32A three-phase power distribution unit with daisy-chain provides centralised power management. It offers six Schuko outlets: three supply the amplifiers and three remain available for additional devices. Three circuit breakers and three digital voltage/current meters support protected operation and quick on-site checks.

A 1U LED rack light with motion sensor and multicolour-led completes the rack for easy cabling even in dark environments.

Specifiche

Generale

Scope of delivery

3 × LDADA12K4, 1 × LDADATPP, 1 × LDADAPDU

Materiale

Multiplex

Colore

Nero

Peso

84,9 kg

Ruota

Tipo di rullo

Rullo per impieghi gravosi

Materiale

Gomma

Colore

Blu

Quantità

Rulli frenati

Diametro

100 mm

Dimensioni e peso

Larghezza

598,4 mm

Altezza

909 mm

Profondità

684 mm

Larghezza del rack

19"

Altezza del rack

12 U

Peso

84,9 kg

LDADA12K4 - LD Systems ADA 12K4 TOURING RACK Amplificatore a 4 canali con DSP e DANTE™

Tipo di prodotto

Amplifier

Tipo

4 canali

Gestione dei canali:

Ingressi analogici

4 x XLR femmina , n. 4 XLR maschio

Ingressi digitali AES3

2 x XLR male ( Link )

Ingressi digitali DANTE / AES67

2 x XLR Ethercon ( 4 canali audio )

Audio:

Livello max di ingresso

24 dBu

Crosstalk ( 1 kHz )

- 75 db typ

Impedenza di ingresso

20 kOhm ( sym. ) Ohm

CMRR

65 dB typ dB

THD+N ( 0,1 W a metà potenza )

< 0.1 % ( typical < 0.05 % )

SMPTE IMD (0,1 W a metà potenza)

< 0.1 % ( typical < 0.05 % )

Impedenza di uscita a 100 Hz

30 mOhm

DSP:

Converter AD

125 dB-A Dynamic Range - 0.005 % THD+N , 24 Bit Tandem™ @ 48 kHz

Convertitori DA

117 dB-A Dynamic Range - 0.003 % THD+N , 24 Bit Tandem™ @ 48 kHz

Sample rate converter

140 dB Dynamic Range - 0.0001 % THD+N , 24 Bit @ 96 kHz

Internal precision

32 bit floating point

Latenza

2,5 ms

Memory / presets

50 amplifier snapshots , Virtually unlimited speaker presets

Delay

2 s ( input ) + 100 ms ( output ) mS

Equalizer

Allpass , Bandpass , Custom FIR , Hi / lo-pass , Hi / Lo-Shelving , Notch - Filter , Parametric IIR: , Peaking , Raised-cosine

Crossover

6 dB / oct to 48 dB / oct ( IIR ) , Bessel , Butterworth , Linear phase (FIR) , Linkwitz-Riley

Limiter

Peak Limiter , RMS Power , RMS power supply limiter , TruePower™

Damping control

Active DampingControl™ , LiveImpedance™ measurement

Display:

Risoluzione

480 x 272, 4.3” diagonal

Luminosità

600 nit

Comando

Rotary encoder 20 steps / turn with pushbutton , Multitouch capacitive

Uscita:

Per channel @ 2 Ohm ( symmetrical )

2000 W

Per channel @ 2 Ohm ( asymmetrical )

2000 W

Per channel @ 4 Ohm ( symmetrical )

2700 W

Per channel @ 4 Ohm ( asymmetrical )

3000 W

Per channel @ 8 Ohm ( symmetrical )

1800 W

Per channel @ 8 Ohn ( asymmetrical )

1900 W

Bridge Mode 4 Ohm

4000 W

Bridge Mode 8 Ohm

5400 W

Max. Potenza di uscita

180 Vpeak

Corrente di uscita max.

> 55 Apeak

Power & Thermal:

Consumo di corrente 100 V in standby

16 W

Consumo energetico 100 V inattivo

42 W

Consumo energetico 1/8 potenza @ 4 ohm

1570 W

Potenza assorbita 1 / 8 @ 4 ohm

16,5 Arms

Perdita termica 1/8 Potenza @ 4 Ohm

1670 BTU / h

Consumo di corrente 240 V in standby

17 W

Consumo energetico 240 V inattivo

42 W

Consumo energetico 240 V 1/8 potenza @ 4 ohm

1940 W

Potenza assorbita 240 V 1 / 8 @ 4 ohm

8,9 Arms

Perdita termica 240 V 1/8 Potenza @ 4 Ohm

8,9 Arms

Tipo di alimentazione

SRM

Tensione nominale (+/- 10%)

100 V - 240 V AC, 50/60 Hz

Tensione di esercizio

90 V AC - 264 V AC, 50 - 60 Hz

Tipo di collegamento

IEC C 20 ( 20 A max )

La rete:

Connettività

2 x Gigabit Ethernet ports , Connettori Ethercon , Integrated switch

Topologie supportate

Daisy Chain , Star

Remote Interface

ArmoníaPlus o altro software preferito

Dimensioni e peso:

Larghezza

483 mm

Altezza

88,9 mm

Profondità

381 mm

Peso

11,3 kg

LDADAPDU - LD Systems ADA 12K4 TOURING RACK 2U, 19" Three-Phase Rack PDU (32A)

Generale:

Input connector type

CEE plug 32A male

Output connector type

Schuko socket female

Classe di protezione dell'uscita

IP54

Output 2nd connector type

CEE plug 32A female

Materiale

Acciaio

Numero di uscite

Colore

Nero

Dimensioni e peso:

Larghezza

483 mm

Altezza

88 mm

Profondità

191,1 mm

Larghezza del rack

19"

Altezza del rack

2 U

Profondità di installazione

124,1 mm

Peso

3,75 kg

LDADATPP - LD Systems ADA 12K4 TOURING RACK 3U, 19" Front I/O Patch Panel

Generale:

Materiale

Acciaio

Colore

Nero

Connettori frontali:

XLR 3-pole female (analog in)

XLR 3-pole female (AES3 in)

RJ-45 (AES72)

RJ-45 Ethernet (DANTE™/AES67)

speakON® 4-pole male

speakON® 8-pole male

Dimensioni e peso:

Larghezza

480 mm

Altezza

132,5 mm

Profondità

249 mm

Larghezza del rack

19"

Altezza del rack

3 U

Profondità di installazione

244 mm

Peso

8,52 kg