Contenuti e categorie

Mostra tutti

Contenuti e categorie

Serie

Suggerimenti di ricerca

Mostra tutti i risultati

ROADBUDDY 10 HBH 2 Battery-Powered Bluetooth Speaker with Mixer, Wireless Microphone, Bodypack and Headset

N. articolo: LDRBUD10HBH2
Serie: ROAD
Versioni:
Battery-powered speaker solution
Integrated radio receiver 863 - 865 MHz for license-free operation
Bluetooth player with USB port and SD card slot
Class D power amplifier with 480 watts of peak power
2 combo sockets for microphone or line inputs
3.5 mm Aux input
Master section with 2-band EQ
Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
2 Wireless microphones and IR-remote control included
 

Contenuti e categorie

Mostra tutti

Contenuti e categorie

Serie

Suggerimenti di ricerca

Mostra tutti i risultati
Battery-powered speaker solution
Integrated radio receiver 863 - 865 MHz for license-free operation
Bluetooth player with USB port and SD card slot
Class D power amplifier with 480 watts of peak power
2 combo sockets for microphone or line inputs
3.5 mm Aux input
Master section with 2-band EQ
Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
2 Wireless microphones and IR-remote control included
Descrizione

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Specifiche
Generale
Type
Active
Potenza di picco in uscita
480 W
Potenza di uscita RMS
120 W
Classe Amp
Class D
Max. Picco SPL
115 dB
Max. SPL medio
96 dB
Numero di ingressi
3
Input connector types
RCA femmina
Caratteristiche di protezione
Cortocircuito, Sovratensione, Sovraccarico
Colore
Nero
Bluetooth®
Caratteristiche
Streaming audio (A2DP), Bluetooth MIDI
Gamma Bluetooth®
≤70 m (Classe 1-2)
Trasmissione radio
Canali
16
Antenna connector
TNC female
Antenne
2 x TNC female
Ingressi
Numero di ingressi microfonici/linea
2
Mic/Line-in connector type
XLR combo socket
Numero di ingressi per microfono
2
Mic-in connector type
XLR combo socket
Numero di ingressi di linea
1
Tipo di connettore Line-In
XLR combo socket
Numero di ingressi musicali
2
Tipi di connettore degli ingressi musicali
RCA femmina
Elaborazione del segnale
Mixer
Canali del mixer
2
Elaborazione audio
EQ 2 bande (alte, basse)
Driver dei bassi
Dimensione
10 "
Magnete
Ferrite
Tweeter
Dimensione del driver
1 "
Design
Tweeter a cupola morbida
Magnete
Ferrite
Funzionamento a rete
Operation voltage
220 V AC - 240 V AC / 50 - 60 Hz
Tipo di alimentazione
Alimentazione a commutazione (SMPS)
Mains connector
IEC C14 plug male
Dati dell'accumulatore
Tensione di esercizio
12 V
Capacità della batteria
5 Ah
Durata dell'accumulatore
8 h
Alloggiamento
Design
Riflesso dei bassi
Flangia
36 mm (0°/5°)
Materiale del telaio
Polipropilene
Dimensioni e peso
Larghezza
415 mm
Altezza
525 mm
Profondità
328 mm
Peso
16,5 kg
Altre proprietà
Accessori inclusi
Cavo di rete
Download e link
Prodotti correlati
Acquista
Nessun negozio online adatto trovato? Poi cerca su Google Shopping oppure trova un rivenditore nelle vicinanze: